Gutter Installation in Edmond, OK That Protects Your Home
Mark Ferguson Roofing & Construction handles gutter installation in Edmond, OK and the Oklahoma City metro, carrying roof water off the house and away from your foundation.
Signs Your Home Needs New Gutters
Gutters collect the rainwater that falls on your roof and direct it to a few designated drainage points. When they fail, overflowing water lands exactly where it causes the most damage: against the siding, into flower beds and along the foundation. Some problems can be patched, but others mean it is time for a new system.
Look along the roof edge during the next hard rain. Consider new gutters when you notice any of these:
- No gutters at all on parts of the house where water pours off the eaves
- Rust holes, split seams or many leaking joints on an old system
- Gutters that pull away from the fascia no matter how often they are rehung
- Soil washing out of beds or puddles that stand near the foundation
- Water stains or peeling paint on the siding below the eaves
- A new roof going on, which is a natural time to update the gutters too
Our Gutter Installation Process
Good gutter installation in Edmond, OK starts with the layout. Each step is aimed at moving water from the roof to the right spot on the ground.
-
Measure and Plan
We measure each roof edge, look at the slope of the roof and note where water collects today. The plan shows the gutter size and where each downspout goes.
-
Prepare the Fascia
Old gutters come down, and we check the fascia boards behind them. Soft or rotted wood is flagged for repair so the new gutters hang on solid wood.
-
Hang the Gutters
Gutters are set with a slight slope toward each outlet and fastened with hangers along the run. Corners and end caps are sealed against leaks.
-
Downspouts and Test
Downspouts and extensions go in, and we run water through the system to check the flow. We clean up the old gutters and debris before we leave.
Seamless Gutters and Why Fewer Joints Matter
Seamless gutters are formed from a single coil of metal to the exact length of each roof edge. Sectional gutters come in short pieces, often about 10 feet long, joined with seams along the run. Every seam is a potential location where sealant deteriorates and water escapes.
With seamless gutters, the only joints are at the corners, the end caps and the downspout outlets. That means far fewer places for leaks to start, and a cleaner look from the street with no seam lines every few feet.
A gutter with no seams still has needs of its own. It requires the right size for the roof, enough hangers to carry the weight of water and debris, and a steady slope toward the outlets. A one-piece gutter that is too small for a steep, wide roof will overflow in a heavy Oklahoma storm just like any other.
Gutter Guards: Are They Right for Your Home?
Gutter guards are protective covers or screens installed over the top of the gutter. They let water in while keeping out most leaves, twigs and roof granules. The objective is fewer clogs and less time spent climbing a ladder.
Guards make the most sense on homes with large trees close to the roof, or on two-story houses where cleaning is hard to do safely. They also help keep downspouts from backing up during fall leaf drop. On a house with no trees nearby, a guard may not be worth the added cost.
No guard is maintenance free. Fine debris and pine needles can still build up on top of a screen, and the gutter under it still needs a check now and then. We can talk through the options during your estimate and help you decide whether guards fit your home and your trees.
Downspout Installation and Drainage Away from the Foundation
Downspouts perform the final and most important part of the drainage process. A gutter can catch every drop, but if the downspout dumps water at the base of the wall, the foundation still takes the hit. Good downspout installation starts with placing enough outlets to keep up with the roof.
A common guideline is one downspout for every 30 to 40 feet of gutter, with more where a large roof area drains to one corner. Long runs may need a downspout at each end. Larger downspouts can help where a steep or wide slope sends a lot of water to one spot.
At ground level, extensions or splash blocks carry discharged water away from the house. Pointing that flow toward a lawn or a slope that falls away from the home keeps soil from washing out and water from pooling against the foundation.
What Affects the Cost of Gutter Installation in Edmond, OK
The cost of gutter installation in Edmond, OK is based on your home, and we give a free written estimate after we measure. These details shape the final number the most:
- The total length of roof edge that needs gutters
- The height of the house and the number of stories
- The gutter size and the number of corners and downspouts
- Whether old gutters need to come down and be hauled away
- Fascia repair needed before the new gutters can hang
- Add-ons such as leaf screens or downspout extensions
Pairing new gutters with a new roof can save a separate trip, since the roof edge and the fascia are already being worked on. We can price the gutters on their own or as part of the roof, whichever helps you plan.
Why Choose Mark Ferguson Roofing & Construction for Gutters
Mark Ferguson Roofing & Construction has worked on homes in Edmond and the Oklahoma City metro for more than a decade. We are a GAF Certified Roofer, BBB A+ Accredited, and registered with the Oklahoma Construction Industries Board (Okla. CIB #80000174).
As a roofing company, we see gutters as part of the roof edge. We look at the drip edge, the fascia and the shingles above the gutter, so water flows cleanly from the roof into the trough and not behind it. Properly installed drip edge directs runoff into the gutter instead of letting it soak the fascia.
Homeowners searching for gutters in Edmond, OK get a local team and a free written estimate. You will know the gutter size, the downspout layout and the price before any work begins.
- GAF Certified Roofer, recognized by the shingle maker GAF
- BBB A+ Accredited Business
- Okla. CIB Registered for roofing, #80000174
- Edmond based More than a decade in the metro
Gutter Installation Across Central Oklahoma
Heavy spring rains fall across the whole region, and every home needs a clear path for that water. Oklahoma storms can deliver a remarkable amount of rain in a short period, and undersized or poorly positioned gutters overflow quickly. We handle gutter installation in Edmond, OK and in the counties around it, from small ranch houses to tall two-story homes.
We put in new gutters and downspouts for homeowners in Logan County, Lincoln County, Grady County and Comanche County. Each home gets the same careful measurements, the same downspout layout and the same free written estimate.
If your current gutters are sound but clogged or sagging, gutter repair and cleaning may be all you need. Gutters are one part of our wider roofing and exterior services, which also cover soffits, fascia and siding.
Gutter Installation Questions from Edmond Homeowners
What size gutters does my house need?
Most homes use 5 inch gutters, but larger or steeper roofs can send more water than a 5 inch trough can carry in a hard rain. In those cases, 6 inch gutters and larger downspouts handle the flow better. We measure the roof area and pitch that drain to each run before we recommend a size.
How long does gutter installation take?
The schedule depends on the length of the roof edge, the height of the house and whether old gutters or rotted fascia need work first. We give you an expected timeline with your estimate, so you know when the crew will arrive and when the work will wrap up.
Should I replace my gutters when I get a new roof?
It is often a good time. The roof edge is already open, so the drip edge, fascia and gutters can be fitted together. Old gutters can also be bent or loosened during a tear-off. If your gutters are newer and in good shape, they can usually stay, and we will check them during the roof estimate.
Where should my downspouts drain?
Downspouts should send water at least a few feet away from the house, onto ground that slopes away from the foundation. Extensions, splash blocks or a lawn area all work well. Avoid draining onto a driveway that slopes toward the garage, a neighbor's yard or a spot where water already pools after rain.
Do gutter guards stop all clogs?
No guard stops every clog. Guards keep out most leaves and twigs, which cuts down on cleaning, but fine debris and roof granules can still build up over time. The gutter under the guard still needs a check now and then. Guards save the most work on homes with large trees near the roof.
Plan Your New Gutters Before the Spring Rains
The right gutters protect your siding, your landscaping and your foundation every time it rains. Call Mark Ferguson Roofing & Construction for a free estimate and a gutter plan measured for your home.
Mon-Fri 7am-6pm, Sat 8am-5pm, Sun closed